Xiaomi Mi Max 2 - Specifications

WidthHeightThicknessWeightWrite a review
SpecificationsDisplayCameraCPUBatteryPrices 4
Dimensions: 88.7 x 174.1 x 7.6 mm
Weight: 211 g
SoC: Qualcomm Snapdragon 625 MSM8953
CPU: ARM Cortex-A53, 2000 MHz, Cores: 8
GPU: Qualcomm Adreno 506, 650 MHz
RAM: 4 GB, 933 MHz
Storage: 64 GB, 128 GB
Memory cards: microSD, microSDHC, microSDXC
Display: 6.44 in, IPS, 1080 x 1920 pixels, 24 bit
Battery: 5300 mAh, Li-Ion
OS: MIUI V8.2 (Android 7.1.1 Nougat)
Camera: 4000 x 3008 pixels, 3840 x 2160 pixels, 30 fps
SIM card: Nano-SIM, Micro-SIM / microSD
Wi-Fi: a, b, g, n, n 5GHz, ac, Dual band, Wi-Fi Hotspot, Wi-Fi Direct, Wi-Fi Display
USB: 2.0, USB Type-C
Bluetooth: 4.2
Positioning: GPS, A-GPS, GLONASS, BeiDou

Add for comparison Suggest an edit

Brand and model

Information about the brand, model and model alias (if any) of a specific device.

Brand

Brand name of the company that manufactures the device.

Xiaomi
Model

Model name of the device.

Mi Max 2

Design

Information about the dimensions and weight of the device, shown in different measurement units. Body materials, available colors, certifications.

Width

Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation.

88.7 mm (millimeters)
8.87 cm (centimeters)
0.29 ft (feet)
3.49 in (inches)
Height

Information about the height, i.e. the vertical side of the device when it is used in its standard orientation.

174.1 mm (millimeters)
17.41 cm (centimeters)
0.57 ft (feet)
6.85 in (inches)
Thickness

Information about the thickness/depth of the device in different measurement units.

7.6 mm (millimeters)
0.76 cm (centimeters)
0.02 ft (feet)
0.3 in (inches)
Weight

Information about the weight of the device in different measurement units.

211 g (grams)
0.47 lbs (pounds)
7.44 oz (ounces)
Volume

Estimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the form of a rectangular parallelepiped.

117.36 cm³ (cubic centimeters)
7.13 in³ (cubic inches)
Colors

Information about the colors, in which the device is available in the market.

Gray
Champagne
Body materials

Materials used in the fabrication of the device's body.

Aluminium alloy
Plastic

SIM card

The Subscriber Identity Module (SIM) is used in mobile devices for storing data authenticating the subscribers of mobile services.

SIM card type

Information about the type and size (form factor) of the SIM card used in the device.

Nano-SIM (4FF - fourth form factor, since 2012, 12.30 x 8.80 x 0.67 mm)
Micro-SIM / microSD
Number of SIM cards

Information about the number of SIM cards, supported by the device.

2

Networks

A mobile (cellular) network is a radio system, which allows a large number of mobile devices to communicate with each other.

GSM

GSM (Global System for Mobile Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology.

GSM 850 MHz
GSM 900 MHz
GSM 1800 MHz
GSM 1900 MHz
CDMA

CDMA (Code-Division Multiple Access) is a channel access method for communications within mobile networks. Compared to other 2G and 2.5G standards like GSM and TDMA, it provides increased data transfer speeds and allows more subscribers to connect simultaneously to the network.

CDMA 800 MHz
TD-SCDMA

TD-SCDMA (Time Division Synchronous Code Division Multiple Access) is a 3G standard for mobile networks. It is developed as an alternative to the W-CDMA standard in China by the Chinese Academy of Telecomunications Technology, Datang Telecom and Siemens AG, and combines TDMA and CDMA.

TD-SCDMA 1880-1920 MHz
TD-SCDMA 2010-2025 MHz
UMTS

UMTS stands for Universal Mobile Telecommunications System. Based on the GSM standard, it is deemed as a 3G mobile network standard. It has been developed by the 3GPP and its major advantage is the provision of greater bandwidth and spectral efficiency, due to the W-CDMA technology.

UMTS 850 MHz
UMTS 900 MHz
UMTS 1900 MHz
UMTS 2100 MHz
LTE

LTE is deemed to be the fourth generation (4G) of mobile communications technology. It has been developed by the 3GPP based on the GSM/EDGE and UMTS/HSPA technologies in order to increase the speed and capacity of wireless data networks. A further development of the technology is called LTE Advanced.

LTE 850 MHz
LTE 900 MHz
LTE 1800 MHz
LTE 2100 MHz
LTE 2600 MHz
LTE-TDD 1900 MHz (B39)
LTE-TDD 2300 MHz (B40)
LTE-TDD 2500 MHz (B41)
LTE-TDD 2600 MHz (B38)

Mobile network technologies and bandwidth

Communication between devices within mobile networks is realized via various generations of network technologies, which provide different bandwidth.

Mobile network technologies

There are several network technologies that enhance the performance of mobile networks mainly by increased data bandwidth. Information about the communication technologies supported by the device and their respective uplink and downlink bandwidth.

UMTS (384 kbit/s )
EDGE
GPRS
HSPA+
LTE
EV-DO Rev. A (1.8 Mbit/s , 3.1 Mbit/s )
TD-SCDMA
TD-HSDPA

Operating system

Operating system is the system software, which manages and controls the functioning of the hardware components of the device.

Operating system (OS)

Information about the operating system used by the device as well as its version.

MIUI V8.2 (Android 7.1.1 Nougat)

System on Chip (SoC)

A system on a chip (SoC) includes into a single chip some of the main hardware components of the mobile device.

SoC

The SoC integrates different hardware components such as the CPU, GPU, memory, peripherals, interfaces, etc., as well as software for their functioning.

Qualcomm Snapdragon 625 MSM8953
Process technology

Information about the process technology used in manufacturing the chip. The value in nanometers represents half the distance between elements that make up the CPU.

14 nm (nanometers)
CPU

CPU is the Central Processing Unit or the processor of a mobile device. Its main function is to interpret and execute instructions contained in software applications.

ARM Cortex-A53
CPU bits

The CPU bits are determined by the bit-size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors.

64 bit
Instruction set

The instruction set architecture (ISA) is a set of commands used by the software to manage the CPU's work. Information about the set of instructions the processor can execute.

ARMv8
CPU cores

A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel.

8
CPU frequency

The frequency of the processor describes its clock rate in cycles per second. It is measured in Megahertz (MHz) or Gigahertz (GHz).

2000 MHz (megahertz)
GPU

GPU is a graphical processing unit, which handles computation for 2D/3D graphics applications. In mobile devices GPU is usually utilized by games, UI, video playback, etc. GPU can also perform computation in applications traditionally handled by the CPU.

Qualcomm Adreno 506
GPU frequency

The frequency is the clock rate of the graphic processor (GPU), which is measured in Megahertz (MHz) or Gigahertz (GHz).

650 MHz (megahertz)
RAM capacity

RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted.

4 GB (gigabytes)
RAM type

Information about the type of RAM used by the device.

LPDDR3
RAM channels

Information about the number of RAM channels integrated in the SoC. More channels mean higher data transfer rates.

Single channel
RAM frequency

RAM frequency relates directly to the rate of reading/writing from/in the RAM memory.

933 MHz (megahertz)

Storage

Every mobile device has a built-in storage (internal memory) with a fixed capacity.

Storage

Information about the capacity of the built-in storage of the device. Sometimes one and the same model may is offered in variants with different internal storage capacity.

64 GB (gigabytes)
128 GB (gigabytes)

Memory cards

Memory cards are used in mobile devices for expanding their external storage capacity.

Types

The various types of memory cards are characterized by different sizes and capacity. Information about the supported types of memory cards.

microSD
microSDHC
microSDXC

Display

The display of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.

Type/technology

One of the main characteristics of the display is its type/technology, on which depends its performance.

IPS
Diagonal size

In mobile devices display size is represented by the length of its diagonal measured in inches.

6.44 in (inches)
163.58 mm (millimeters)
16.36 cm (centimeters)
Width

Approximate width of the display

3.16 in (inches)
80.19 mm (millimeters)
8.02 cm (centimeters)
Height

Approximate height of the display

5.61 in (inches)
142.57 mm (millimeters)
14.26 cm (centimeters)
Aspect ratio

The ratio between the long and the short side of the display

1.778:1
16:9
Resolution

The display resolution shows the number of pixels on the horizontal and vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content.

1080 x 1920 pixels
Pixel density

Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen.

342 ppi (pixels per inch)
134 ppcm (pixels per centimeter)
Color depth

The color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display.

24 bit
16777216 colors
Display area

The estimated percentage of the screen area from the device's front area.

74.28 % (percent)
Other features

Information about other functions and features of the display.

Capacitive
Multi-touch
Scratch resistant
2.5D curved glass screen
1000:1 contrast ratio
450 cd/m²
72% NTSC

Sensors

Different sensors measure different physical quantities and convert them into signals recognizable by the mobile device.

Sensors

Sensors vary in type and purpose. They increase the overall functionality of the device, in which they are integrated.

Proximity
Light
Accelerometer
Compass
Gyroscope
Fingerprint
Hall
Fingerprint sensor model - Fingerprint Cards FPC1035

Primary camera

The primary camera of the mobile device is usually placed at its back and is used for taking photos and recording videos.

Sensor model

Information about the manufacturer and the model of the image sensor used by the camera of the device.

Sony IMX386 Exmor RS
Sensor type

Digital cameras use image sensors for taking photos. The sensor characteristics are some of the main factors determining the quality of the camera integrated in the mobile device.

CMOS (complementary metal-oxide semiconductor)
Sensor size

Information about the dimensions of the image sensor used in the device. Usually cameras with larger sensors and less pixel density tend to provide better image quality despite the lower resolution.

4.96 x 3.72 mm (millimeters)
0.24 in (inches)
Pixel size

A smaller pixel size allows the image sensor to use more pixels thus providing better image resolution. On the other hand, this may negatively impact noise levels and decrease image quality at high ISO settings.

1.24 µm (micrometers)
0.00124 mm (millimeters)
Crop factor

Crop factor is the ratio of the dimensions of a full frame camera's sensor (36 x 24 mm, which equals the frame size of a 35 mm film) and the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) and the device sensor.

6.98
ISO

ISO rating indicates the light sensitivity of the image sensor. The lower the number, the less sensitive to light the image sensor is and vice versa - higher ISO ratings indicate higher sensitivity and ability of the image sensor to work better in low light conditions.

100 - 3200
Aperture

Aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is.

f/2.2
Flash type

Cameras of mobile devices use mainly a LED or a Xenon flash. The LED flash has a softer burst of light and in contrast to the much brighter Xenon flash, is used for recording videos as well.

Dual LED
Image resolution

One of the main characteristics of the cameras of mobile devices is their resolution, which shows the number of pixels on the horizontal and vertical dimensions of the image.

4000 x 3008 pixels
12.03 MP (megapixels)
Video resolution

Information about the maximum resolution available for shooting a video with the device.

3840 x 2160 pixels
8.29 MP (megapixels)
Video FPS

Information about the maximum number of frames per second (fps), supported by the device while recording a video at maximum resolution. Some of the main standard frame rates for recording and playing video are 24p, 25p, 30p, 60p.

30 fps (frames per second)
Features

Information about additional software and hardware features of the privamery camera, which improve its overall performance.

Autofocus
Continuous shooting
Digital zoom
Digital image stabilization
Geotagging
Panorama
HDR
Touch focus
Face detection
White balance settings
ISO settings
Exposure compensation
Self-timer
Scene mode
Phase detection
5-element lens
720p @ 120 fps

Secondary camera

Secondary cameras are placed above the screen of the device and are usually used for video calls, gesture recognition, etc.

Aperture

Aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is.

f/2.0
Image resolution

Information about the maximum image resolution of the secondary camera. Often, the resolution of the secondary camera is lower than the one of the primary camera.

2592 x 1944 pixels
5.04 MP (megapixels)
Video resolution

Information about the maximum resolution available for shooting a video by the secondary camera.

1280 x 720 pixels
0.92 MP (megapixels)
Video FPS

Information about the maximum number of frames per second (fps), supported by the secondary camera while recording a video at maximum resolution.

30 fps (frames per second)
Wide-angle lens - 85°
Self-timer

Audio

Information about the type of speakers and the audio technologies supported by the device.

Speaker

The loudspeaker is a device, which reproduces various sounds such as ring tones, alarms, music, voice calls, etc. Information about the type of speakers the device uses.

Loudspeaker
Stereo speakers

Radio

The radio in a mobile device is a built-in FM radio receiver.

Radio

Information whether the device has an FM radio receiver or not.

Yes

Tracking/Positioning

Information about the positioning and navigation technologies supported by the device.

Tracking/Positioning

The tracking/positioning service is provided by various satellite navigation systems, which track the autonomous geo-spatial positioning of the device that supports them. The most common satellite navigation systems are the GPS and the GLONASS. There are also non-satellite technologies for locating mobile devices such as the Enhanced Observed Time Difference, Enhanced 911, GSM Cell ID.

GPS
A-GPS
GLONASS
BeiDou

Wi-Fi

Wi-Fi is a technology that provides wireless data connections between various devices within a short range.

Wi-Fi

Wi-Fi communication between devices is realized via the IEEE 802.11 standards. Some devices have the possibility to serve as Wi-Fi Hotspots by providing internet access for other nearby devices. Wi-Fi Direct (Wi-Fi P2P) is another useful standard that allows devices to communicate with each other without the need for wireless access point (WAP).

802.11a (IEEE 802.11a-1999)
802.11b (IEEE 802.11b-1999)
802.11g (IEEE 802.11g-2003)
802.11n (IEEE 802.11n-2009)
802.11n 5GHz
802.11ac (IEEE 802.11ac)
Dual band
Wi-Fi Hotspot
Wi-Fi Direct
Wi-Fi Display
MiMO

Bluetooth

Bluetooth is a standard for secure wireless data transfer between different types of devices over short distances.

Version

The technology has several versions, which improve the connection speed, range, connectivity and discoverability of the devices. Information about the Bluetooth version of the device.

4.2
Features

Bluetooth uses various profiles and protocols related to faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here.

A2DP (Advanced Audio Distribution Profile)
HID (Human Interface Profile)
LE (Low Energy)

USB

The Universal Serial Bus (USB) is an industry standard that allows different electronic devices to exchange data.

Connector type

There are several USB connector types: the Standard one, the Mini and Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device.

USB Type-C
Version

There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased.

2.0
Features

Тhe USB interface in mobile devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc.

Charging
Host
Mass storage
On-The-Go

Headphone jack

The headphone jack is an audio phone connector, a.k.a. an audio jack. The most widely used one in mobile devices is the 3.5 mm headphone jack.

Headphone jack

Information whether the device is equipped with a 3.5 mm audio jack.

Yes

Connectivity

Information about other important connectivity technologies supported by the devices.

Connectivity

Information about some of the most widely used connectivity technologies supported by the device.

Computer sync
OTA sync
Infrared
Tethering
DLNA
VoLTE

Browser

A web browser is a software application for accessing, fetching, displaying and navigating through information on the World Wide Web.

Browser

Information about some of the features and standards supported by the browser of the device.

HTML
HTML5
CSS 3

Audio file formats/codecs

Mobile devices support various audio file formats and codecs, which respectively store and code/decode digital audio data.

Audio file formats/codecs

List of some of the most common audio file formats and codecs supported standardly by the device.

AAC (Advanced Audio Coding)
AAC+ / aacPlus / HE-AAC v1
AMR / AMR-NB / GSM-AMR (Adaptive Multi-Rate, .amr, .3ga)
AMR-WB (Adaptive Multi-Rate Wideband, .awb)
eAAC+ / aacPlus v2 / HE-AAC v2
FLAC (Free Lossless Audio Codec, .flac)
MIDI
MP3 (MPEG-2 Audio Layer II, .mp3)
OGG (.ogg, .ogv, .oga, .ogx, .spx, .opus)
WMA (Windows Media Audio, .wma)
WAV (Waveform Audio File Format, .wav, .wave)

Video file formats/codecs

Mobile devices support various video file formats and codecs, which respectively store and code/decode digital video data.

Video file formats/codecs

List of some of the most common video file formats and codecs supported standardly by the device.

3GPP (3rd Generation Partnership Project, .3gp)
AVI (Audio Video Interleaved, .avi)
H.263
H.264 / MPEG-4 Part 10 / AVC video
H.265 / MPEG-H Part 2 / HEVC
MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)
VC-1
WMV (Windows Media Video, .wmv)
Xvid

Battery

The batteries of mobile devices differ in capacity and technology. They provide the electrical charge needed for the functioning of the devices.

Capacity

The capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours.

5300 mAh (milliampere-hours)
Type

The battery type is determined by its structure and more specifically, by the chemicals used in it. There are different battery types and some of the most commonly used in mobile devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer).

Li-Ion
2G talk time

2G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 2G cellular network.

57 h (hours)
3420 min (minutes)
2.4 days
3G talk time

3G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 3G cellular network.

57 h (hours)
3420 min (minutes)
2.4 days
Charger output power

Information about the electric current (amperes) and voltage (volts) the charger outputs. The higher power output allows faster charging.

9 V (volts) / 2 A (amps)
Quick charge technology

Quick charge technologies differ in energy efficiency, power output, control over charging, temperatures, etc. The device, battery and charger must support one and the same charging technology to achieve faster charging times.

Qualcomm Quick Charge 3.0
Features

Information about some additional features of the device's battery.

Fast charging
Non-removable

Most recent comparisons including Xiaomi Mi Max 2

List of the latest comparisons made by the website visitors, which include Xiaomi Mi Max 2

Sony Xperia XA1 Dual
Xiaomi Mi Max 2
View
Vivo X7
Sony Xperia T
Xiaomi Mi Max 2
View
Xiaomi Redmi Note 4 MSM8953
Xiaomi Redmi Note 4X
Xiaomi Mi Max 2
Xiaomi Mi 5c
View
Xiaomi Mi Max 2
Xiaomi Mi Max
Xiaomi Redmi Note 4 64GB
Xiaomi Redmi Pro Exclusive Edition
View
Xiaomi Mi Max 2
Xiaomi Redmi Note 3 Pro 32GB
Apple iPhone 7 Plus
View
Xiaomi Mi Max 2
nubia Z17 Mini Standard Edition
View
Xiaomi Mi Max 2
Xiaomi Mi 6 Plus
Huawei Honor 6X
Huawei Honor 8 Pro
View
Xiaomi Mi Max 2
Xiaomi Mi Max MSM8956
Xiaomi Redmi Pro Standard Edition
Xiaomi Redmi Pro High Edition
View

Last viewed devices

List of mobile devices, whose specifications have been recently viewed.

Xiaomi Mi Max 2

Xiaomi Mi Max 2

Dimensions: 88.7 x 174.1 x 7.6 mm
Weight: 211 g
SoC: Qualcomm Snapdragon 625 MSM8953
CPU: ARM Cortex-A53, 2000 MHz, Cores: 8
GPU: Qualcomm Adreno 506, 650 MHz
RAM: 4 GB, 933 MHz
Storage: 64 GB, 128 GB
Display: 6.44 in, IPS, 1080 x 1920 pixels, 24 bit
Battery: 5300 mAh, Li-Ion
OS: MIUI V8.2 (Android 7.1.1 Nougat)
Camera: 4000 x 3008 pixels, 3840 x 2160 pixels, 30 fps