Comparison between:
- Timmy E86
- Tecno Spark 4
Brand and model
Information about the brand, model and model alias (if any) of a specific device.
| Timmy E86 | Tecno Spark 4 | |
 |  | |
| Model alias | - | Spark4 |
Design
Information about the dimensions and weight of the device, shown in different measurement units. Body materials, available colors, certifications.
| Width | 79.1 mm 7.91 cm 0.26 ft 3.114 in | 75.9 mm 7.59 cm 0.249 ft 2.988 in |
| Height | 153 mm 15.3 cm 0.502 ft 6.024 in | 165.28 mm 16.528 cm 0.542 ft 6.507 in |
| Thickness | 8 mm 0.8 cm 0.026 ft 0.315 in | 8.2 mm 0.82 cm 0.027 ft 0.323 in |
| Weight | 180 g 0.4 lbs 6.35 oz | - |
| Volume | 96.82 cm³ 5.88 in³ | 102.87 cm³ 6.25 in³ |
| Colors | Black Blue | Royal Purple Vacation Blue Misty Grey Energetic Orange |
| Body materials | Plastic | Plastic |
SIM card
The Subscriber Identity Module (SIM) is used in mobile devices for storing data authenticating the subscribers of mobile services.
| SIM card type | Mini-SIM Micro-SIM | Nano-SIM |
| Number of SIM cards | 2 | 2 |
| Features | Dual SIM stand-by (Both cards are active. When one is busy, the other is not active) | Dual SIM stand-by (Both cards are active. When one is busy, the other is not active) |
Networks
A mobile (cellular) network is a radio system, which allows a large number of mobile devices to communicate with each other.
| GSM | GSM 850 MHz GSM 900 MHz GSM 1800 MHz | GSM 850 MHz (B5) GSM 900 MHz (B8) GSM 1800 MHz (B3) GSM 1900 MHz (B2) |
| W-CDMA | W-CDMA 850 MHz W-CDMA 2100 MHz | W-CDMA 900 MHz (B8) W-CDMA 2100 MHz (B1) |
| LTE | - | LTE-FDD 1800 MHz (B3) LTE-TDD 2300 MHz (B40) |
Mobile network technologies and bandwidth
Communication between devices within mobile networks is realized via various generations of network technologies, which provide different bandwidth.
| Mobile network technologies | UMTS EDGE GPRS HSPA+ | UMTS EDGE GPRS HSPA+ LTE Cat 4 |
Operating system
Operating system is the system software, which manages and controls the functioning of the hardware components of the device.
| Operating system (OS) | Android 4.4.2 KitKat | HiOS 5.0 (Android 9.0 Pie) |
System on Chip (SoC)
A system on a chip (SoC) includes into a single chip some of the main hardware components of the mobile device.
| SoC | MediaTek MT6582 | MediaTek Helio A22 (MT6761) |
| Process technology | 28 nm | 12 nm |
| CPU | 4x 1.3 GHz ARM Cortex-A7 | 4x 2.0 GHz ARM Cortex-A53 |
| CPU bits | 32 bit | 64 bit |
| Instruction set | ARMv7-A | ARMv8-A |
| Level 1 cache memory (L1) | 32 KB + 32 KB | - |
| Level 2 cache memory (L2) | 512 KB 0.5 MB | - |
| CPU cores | 4 | 4 |
| CPU frequency | 1300 MHz | 2200 MHz |
| GPU | ARM Mali-400 MP2 | IMG PowerVR GE8300 |
| GPU cores | 2 | - |
| GPU frequency | 500 MHz | 660 MHz |
| RAM capacity | 1 GB | 2 GB |
| RAM type | LPDDR2/LPDDR3 | LPDDR3 |
| RAM channels | Single channel | Single channel |
| RAM frequency | 533 MHz | 933 MHz |
Storage
Every mobile device has a built-in storage (internal memory) with a fixed capacity.
| Storage | 8 GB | 32 GB |
Memory cards
Memory cards are used in mobile devices for expanding their external storage capacity.
| Types | microSD microSDHC | microSD microSDHC microSDXC |
Display
The display of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.
| Type/technology | IPS | IPS |
| Diagonal size | 5.5 in 139.7 mm 13.97 cm | 6.52 in 165.61 mm 16.56 cm |
| Width | 2.7 in 68.49 mm 6.85 cm | 2.68 in 67.96 mm 6.8 cm |
| Height | 4.79 in 121.76 mm 12.18 cm | 5.95 in 151.02 mm 15.1 cm |
| Aspect ratio | 1.778:1 16:9 | 2.222:1 |
| Resolution | 720 x 1280 pixels | 720 x 1600 pixels |
| Pixel density | 267 ppi 104 ppcm | 269 ppi 105 ppcm |
| Color depth | 24 bit 16777216 colors | 24 bit 16777216 colors |
| Display area | 69.13 % | 82.08 % |
| Other features | Capacitive Multi-touch | Capacitive Multi-touch |
Sensors
Different sensors measure different physical quantities and convert them into signals recognizable by the mobile device.
| Sensors | Proximity Light Accelerometer | Proximity Light Accelerometer Fingerprint |
Main rear camera
The main camera of the mobile device is usually placed on its back and can be combined with one or more additional cameras.
| Sensor type | CMOS | CMOS |
| Aperture | - | f/1.8 |
| Flash type | LED | LED |
| Image resolution | 3264 x 2448 pixels 7.99 MP | 4128 x 3096 pixels 12.78 MP |
| Video resolution | 1280 x 720 pixels 0.92 MP | 1280 x 720 pixels 0.92 MP |
| Video FPS | 30 fps | 30 fps |
| Features | Autofocus Continuous shooting Digital zoom Digital image stabilization Geotagging Panorama HDR Touch focus Face detection White balance settings ISO settings Exposure compensation Scene mode | Autofocus Continuous shooting Digital zoom Geotagging Panorama HDR Touch focus Face detection White balance settings ISO settings Exposure compensation Self-timer Scene mode |
| - | Secondary rear camera - 2 MP Third rear camera |
Front camera
Modern smartphones have one or more front cameras and their positioning has led to various design concepts – pop-up camera, rotating camera, notch, punch hole, under-display camera, etc.
| Sensor type | - | CMOS |
| Aperture | - | f/2 |
| Auxiliary light | - | LED |
| Image resolution | 1600 x 1200 pixels 1.92 MP | 3264 x 2448 pixels 7.99 MP |
| Video resolution | - | 1280 x 720 pixels 0.92 MP |
| Video FPS | - | 30 fps |
| Features | - | Face unlock |
Audio
Information about the type of speakers and the audio technologies supported by the device.
| Speaker | Loudspeaker Earpiece | Loudspeaker Earpiece |
Radio
The radio in a mobile device is a built-in FM radio receiver.
| Radio | Yes | Yes |
Tracking/Positioning
Information about the positioning and navigation technologies supported by the device.
| Tracking/Positioning | GPS A-GPS | GPS A-GPS |
Wi-Fi
Wi-Fi is a technology that provides wireless data connections between various devices within a short range.
| Wi-Fi | 802.11b 802.11g 802.11n Wi-Fi Hotspot | 802.11a 802.11b 802.11g 802.11n Wi-Fi Hotspot |
Bluetooth
Bluetooth is a standard for secure wireless data transfer between different types of devices over short distances.
| Version | 4.0 | 5.0 |
| Features | A2DP | A2DP LE |
USB
The Universal Serial Bus (USB) is an industry standard that allows different electronic devices to exchange data.
| Connector type | Micro USB | Micro USB |
| Version | 2.0 | 2.0 |
| Features | Charging Mass storage | Charging Mass storage On-The-Go |
Headphone jack
The headphone jack is an audio phone connector, a.k.a. an audio jack. The most widely used one in mobile devices is the 3.5 mm headphone jack.
| Headphone jack | Yes | Yes |
Connectivity
Information about other important connectivity technologies supported by the devices.
| Connectivity | Computer sync OTA sync Tethering | Computer sync OTA sync Tethering |
Browser
A web browser is a software application for accessing, fetching, displaying and navigating through information on the World Wide Web.
| Browser | HTML HTML5 CSS 3 | HTML HTML5 CSS 3 |
Audio file formats/codecs
Mobile devices support various audio file formats and codecs, which respectively store and code/decode digital audio data.
| Audio file formats/codecs | AAC AMR eAAC+ MIDI MP3 WMA WAV | AAC AAC+ AMR AMR-WB eAAC+ FLAC MIDI MP3 OGG WMA WAV |
Video file formats/codecs
Mobile devices support various video file formats and codecs, which respectively store and code/decode digital video data.
| Video file formats/codecs | 3GPP AVI MP4 WMV | 3GPP AVI DivX MP4 Xvid |
Battery
The batteries of mobile devices differ in capacity and technology. They provide the electrical charge needed for the functioning of the devices.
| Capacity | 2250 mAh | 4000 mAh |
| Type | Li-Ion | Li-Ion |
| 2G talk time | 6 h 360 min 0.3 days | - |
| 2G stand-by time | 180 h 10800 min 7.5 days | - |
| 3G talk time | 5 h 300 min 0.2 days | - |
| 3G stand-by time | 200 h 12000 min 8.3 days | - |
| Features | Removable | Non-removable |
| Timmy E86 | Tecno Spark 4 |