HMD Barbie Phone - Specifications
Brand and model
Information about the brand, model and model alias (if any) of a specific device.
| Brand Brand name of the company that manufactures the device. | HMD |
| Model Model name of the device. | Barbie Phone |
| Model alias Аlternative names, under which the model is known. | TA-1681 |
Design
Information about the dimensions and weight of the device, shown in different measurement units. Body materials, available colors, certifications.
| Width Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation. | 55.1 mm (millimeters) 5.51 cm (centimeters) 0.181 ft (feet) 2.169 in (inches) |
| Height Information about the height, i.e. the vertical side of the device when it is used in its standard orientation. | 108.4 mm (millimeters) 10.84 cm (centimeters) 0.356 ft (feet) 4.268 in (inches) |
| Thickness Information about the thickness/depth of the device in different measurement units. | 18.9 mm (millimeters) 1.89 cm (centimeters) 0.062 ft (feet) 0.744 in (inches) |
| Weight Information about the weight of the device in different measurement units. | 123 g (grams) 0.27 lbs (pounds) 4.36 oz (ounces) |
| Volume Estimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the form of a rectangular parallelepiped. | 112.89 cm³ (cubic centimeters) 6.86 in³ (cubic inches) |
| Colors Information about the colors, in which the device is available in the market. | Power Pink |
| Body materials Materials used in the fabrication of the device's body. | Polycarbonate |
SIM card
The Subscriber Identity Module (SIM) is used in mobile devices for storing data authenticating the subscribers of mobile services.
| SIM card type Information about the type and size (form factor) of the SIM card used in the device. | Nano-SIM (4FF - fourth form factor, since 2012, 12.30 x 8.80 x 0.67 mm) |
| Number of SIM cards Information about the number of SIM cards, supported by the device. | 2 |
| Features Information about some specific features related to the SIM card(s) of the device. | Dual SIM stand-by (Both cards are active. When one is busy, the other is not active) |
Networks
A mobile (cellular) network is a radio system, which allows a large number of mobile devices to communicate with each other.
| GSM GSM (Global System for Mobile Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology. | GSM 850 MHz (B5) GSM 900 MHz (B8) GSM 1800 MHz (B3) GSM 1900 MHz (B2) |
| W-CDMA W-CDMA (Wideband Code Division Multiple Access) is an air interface used by 3G mobile networks. It is one of the three different UMTS interfaces together with the TD-SCDMA and the TD-CDMA. The standard provides faster data transfer speeds and allows more users to connect to the network simultaneously. | W-CDMA 850 MHz (B5) W-CDMA 900 MHz (B8) W-CDMA 1700 MHz (B4) W-CDMA 1900 MHz (B2) W-CDMA 2100 MHz (B1) |
| LTE LTE is deemed to be the fourth generation (4G) of mobile communications technology. It has been developed by the 3GPP based on the GSM/EDGE and UMTS/HSPA technologies in order to increase the speed and capacity of wireless data networks. A further development of the technology is called LTE Advanced. | LTE-FDD 700 MHz (B28) LTE-FDD 800 MHz (B20) LTE-FDD 850 MHz (B5) LTE-FDD 900 MHz (B8) LTE-FDD 1700 MHz (B4) LTE-FDD 1800 MHz (B3) LTE-FDD 1900 MHz (B2) LTE-FDD 2100 MHz (B1) LTE-FDD 2600 MHz (B7) LTE-TDD 1900 MHz (B39) LTE-TDD 2300 MHz (B40) LTE-TDD 2500 MHz (B41) LTE-TDD 2600 MHz (B38) |
Mobile network technologies and bandwidth
Communication between devices within mobile networks is realized via various generations of network technologies, which provide different bandwidth.
| Mobile network technologies There are several network technologies that enhance the performance of mobile networks mainly by increased data bandwidth. Information about the communication technologies supported by the device and their respective uplink and downlink bandwidth. | UMTS (384 kbit/s ) EDGE GPRS HSPA LTE |
Operating system
Operating system is the system software, which manages and controls the functioning of the hardware components of the device.
| Operating system (OS) Information about the operating system used by the device as well as its version. | S30+ |
System on Chip (SoC)
A system on a chip (SoC) includes into a single chip some of the main hardware components of the mobile device.
| SoC The SoC integrates different hardware components such as the CPU, GPU, memory, peripherals, interfaces, etc., as well as software for their functioning. | Unisoc Tiger T107 |
| Process technology Information about the process technology used in manufacturing the chip. The value in nanometers represents half the distance between elements that make up the CPU. | 22 nm (nanometers) |
| CPU CPU is the Central Processing Unit or the processor of a mobile device. Its main function is to interpret and execute instructions contained in software applications. | 1x 1.0 GHz ARM Cortex-A7 |
| CPU bits The CPU bits are determined by the bit-size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors. | 32 bit |
| Instruction set The instruction set architecture (ISA) is a set of commands used by the software to manage the CPU's work. Information about the set of instructions the processor can execute. | ARMv7-A |
| CPU cores A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel. | 1 |
| CPU frequency The frequency of the processor describes its clock rate in cycles per second. It is measured in Megahertz (MHz) or Gigahertz (GHz). | 1000 MHz (megahertz) |
| RAM capacity RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted. | 4 GB (gigabytes) |
| RAM type Information about the type of RAM used by the device. | LPDDR2 |
Storage
Every mobile device has a built-in storage (internal memory) with a fixed capacity.
| Storage Information about the capacity of the built-in storage of the device. Sometimes one and the same model may is offered in variants with different internal storage capacity. | 128 GB (gigabytes) 256 GB (gigabytes) |
Display
The display of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.
| Type/technology One of the main characteristics of the display is its type/technology, on which depends its performance. | LCD |
| Diagonal size In mobile devices display size is represented by the length of its diagonal measured in inches. | 2.8 in (inches) 71.12 mm (millimeters) 7.11 cm (centimeters) |
| Width Approximate width of the display | 1.68 in (inches) 42.67 mm (millimeters) 4.27 cm (centimeters) |
| Height Approximate height of the display | 2.24 in (inches) 56.9 mm (millimeters) 5.69 cm (centimeters) |
| Aspect ratio The ratio between the long and the short side of the display | 1.333:1 4:3 |
| Resolution The display resolution shows the number of pixels on the horizontal and vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content. | 240 x 320 pixels |
| Pixel density Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen. | 143 ppi (pixels per inch) 56 ppcm (pixels per centimeter) |
| Display area The estimated percentage of the screen area from the device's front area. | 40.78 % (percent) |
| Secondary display size - 1.77" with mirror Secondary display resolution - 120 x 160 px |
Rear camera
The primary camera of the mobile device is usually placed on its back and can be combined with one or more additional cameras.
| Flash type The rear cameras of mobile devices use mainly a LED flash. It may arrive in a single, dual- or multi-light setup and in different arrangements. | LED |
| Image resolution One of the main characteristics of the cameras is their image resolution. It states the number of pixels on the horizontal and vertical dimensions of the image, which can also be shown in megapixels that indicate the approximate number of pixels in millions. | 640 x 480 pixels 0.31 MP (megapixels) |
Audio
Information about the type of speakers and the audio technologies supported by the device.
| Speaker The loudspeaker is a device, which reproduces various sounds such as ring tones, alarms, music, voice calls, etc. Information about the type of speakers the device uses. | Loudspeaker Earpiece |
Radio
The radio in a mobile device is a built-in FM radio receiver.
| Radio Information whether the device has an FM radio receiver or not. | Yes |
Bluetooth
Bluetooth is a standard for secure wireless data transfer between different types of devices over short distances.
| Version The technology has several versions, which improve the connection speed, range, connectivity and discoverability of the devices. Information about the Bluetooth version of the device. | 5.0 |
| Features Bluetooth uses various profiles and protocols related to faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here. | A2DP (Advanced Audio Distribution Profile) LE (Low Energy) |
USB
The Universal Serial Bus (USB) is an industry standard that allows different electronic devices to exchange data.
| Connector type There are several USB connector types: the Standard one, the Mini and Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device. | USB Type-C |
| Version There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased. | 2.0 |
| Features Тhe USB interface in mobile devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc. | Charging Mass storage |
Headphone jack
The headphone jack is an audio phone connector, a.k.a. an audio jack. The most widely used one in mobile devices is the 3.5 mm headphone jack.
| Headphone jack Information whether the device is equipped with a 3.5 mm audio jack. | Yes |
Connectivity
Information about other important connectivity technologies supported by the devices.
| Connectivity Information about some of the most widely used connectivity technologies supported by the device. | Computer sync OTA sync Tethering |
Battery
The batteries of mobile devices differ in capacity and technology. They provide the electrical charge needed for the functioning of the devices.
| Capacity The capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours. | 1450 mAh (milliampere-hours) |
| Type The battery type is determined by its structure and more specifically, by the chemicals used in it. There are different battery types and some of the most commonly used in mobile devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer). | Li-Polymer |
| 4G talk time 4G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 4G cellular network. | 9 h (hours) 540 min (minutes) 0.4 days |
| Features Information about some additional features of the device's battery. | Removable |
