Oukitel WP61 Plus Review

Oukitel WP61 Plus Design, build and controls

The Oukitel WP61 Plus emerges as a rugged, industrial statement piece, its substantial thickness intentionally showcasing its vast battery reserves and expansive display. Its design is assertive yet refined, defined by clean, aerodynamic lines that evoke the protective contours of high‑performance gear. Reinforced edges and subtle structural ridges give the device a purposeful solidity, while the smooth planes and restrained detailing keep the overall look modern and uncluttered. The result is a phone that feels less like everyday tech and more like a precision‑built shield - engineered for harsh conditions while maintaining a confident, contemporary aesthetic. The Oukitel WP61 Plus combines polycarbonate, metal, and shock‑absorbing TPU into a chassis that feels more like industrial equipment than a conventional smartphone. Its rugged build is backed by an IP68 rating, allowing it to endure immersion in 1.5 meters of water for up to 30 minutes, while the IP69K certification ensures resistance to high‑pressure jets and elevated temperatures. The device is engineered to operate reliably between –20°C and +55°C, with storage tolerances extending from –40°C to +70°C. Its MIL‑STD‑810H compliance further confirms that it can survive up to 16 drops from 1.5 meters, reinforcing its reputation as a device built for punishing environments. The Oukitel WP61 Plus measures 84.7 mm in width, 179.5 mm in height, and 27.2 mm in thickness, with a weight of 640 grams when the antenna is not attached. Within the niche of smartphones that pair a 6.78‑inch display with a 20,000–20,500 mAh battery, these dimensions place it among the more compact options. Its width sits squarely in the middle of the category, but its height is notably shorter than most competitors, and its overall weight is also lower than many devices in the same ultra‑rugged, high‑capacity class. The front of the WP61 Plus is defined by its large display, protected by 1.1 mm Corning Gorilla Glass 5 and an additional pre‑applied screen protector. The surrounding plastic frame rises about a millimeter above the glass, creating a raised lip that helps shield the screen if the phone lands face‑down. The side bezels measure 3 mm, with a 6 mm lower bezel and a 5 mm upper bezel. The earpiece sits in a slim cutout along the top bezel, which also houses the light and proximity sensors on its left side. A centered punch‑hole accommodates the 32 MP front camera. For navigation, the interface supports both gesture controls and virtual buttons, each offering customization options to match your preferred layout. The rear shell is where the WP61 Plus establishes its strongest visual identity. Its mix of materials, textures, and geometric forms serves both durability and design, giving the phone a purposeful, engineered look. The upper third is dominated by the speaker‑and‑camera assembly, arranged within a bold octagonal housing. At the center sits the 130 dB loudspeaker, flanked on the left by the vertically stacked main camera and macro lens. On the right, another vertical column contains the night‑vision module and a light cluster made up of a single LED flash and two IR emitters. The middle is occupied by a big, rectangular camping light with 1200 Lumens. The bottom is occupied by the NFC area, covered with a flat octagonal plate with the Oukitel logo on it. Towards the edge, there's a lanyard hole. All four sides of the rear shell are sloping to improve ergonomics and handheld experience. The top and bottom are covered with shock-absorbing TPU that overflows to the bottom and top frames and partially to the sides. The middle part is metal that encompasses the middle of the side frames as well, with a subtle matte finish. The top frame of the WP61 Plus carries the antenna connector, protected by an insulating cap. Along the bottom frame sit the sealed USB Type‑C port and microphone, joined by a pair of dual POGO pins that enable dock charging. The right side hosts the round Volume Up/Down keys and the Power button with an integrated fingerprint sensor. On the left frame, you'll find the SIM tray - which can be pulled out using a pick or similar tool - and a customizable shortcut button that can be assigned to various functions.